Now right-click the Startup folder, and choose open all users. Click the Start button and then tab All Programs.Copy the file named setup and close that folder.Now choose and then proceed to Application Data. Go to disk C:, and then to Documents and Settings.Next, click Apply, then OK, and close the Control panel. Now select the View tab and check View hidden files and folders. Go to the Control panel and click folder options.Your magicJack will now start on bootup.Now right click the Startup folder, and choose open all users. Next, copy the file named setup and close that folder.Now choose Users and then proceed to Application Data. Once you make sure your MagicJack is plugged, go through the following steps: How to register your MagicJack on older Windows versions? Windows Vista There are two lights: a blue continuous one, and a white that is blinking.ĭo not hesitate to contact customer service if you encounter any problems. Now, plug in the phone jack, as well as the ethernet jack. Next, plug the MagicGo into the USB extension. Plug the USB extension cord into the AC adaptor. Do not hesitate to contact customer service if you encounter any problems.Green means that the process is completed. Plug your MagicJack to your computer a few days later to check the status. Unplug your MagicJack and look at the 911 badge next to your address: yellow means that the number is in the verification process and it may take several days.Click Exit and use without a PC, if this is the option you want.Also, pay attention to the options you choose (for example, international credits), some of them are paid. Proceed to fill your information and preferences.To continue, you will have to agree to the terms and conditions Click Continue and close the blue pop-up.Next, copy and paste the code and select Activate my device. If you are using the magicJack app on Windows 10, you probably had the following issue after installing the latest Windows Updates : No Audio Found This is caused by a new Windows security feature that deny microphone access by default to any applications. Select Send my code and then check your email account for the code.I think none of this would happen if Windows recognized the MJ usb mass storage device upon boot. Sometimes I get the port reset failed sometimes not. Under the properties box in the device manager I find error 43 or 45. FWIW I have ten ports and all do what I’m trying to describe. So every time I shut down, if I move the dongle to a different port then restart it will work with the bios changed. Started computer with MJ plugged in on say on port 1 recognized until reboot.Ĭomputer off, moved MJ to a different port say 2, restarted and MJ worked until reboot.ĭid it again, turned off, moved usb port 1, restart and MJ worked. So regardless of the port MJ is plugged into it will not start at boot.Ĭhecked Asrock for Bios updates related to USB nothing to update to as the newest version was a sata improvement.Īdjusted everything I thought relevant to USB in Bios. MJ started and worked until reboot.Ĭomputer on unplugged MJ moved to different port worked until rebootĬomputer off moved to different port restarted Computer MJ didn’t start. With computer on unplugged dongle and reinserted in same port. Things I have tried with default bios setting just to see if it would make a difference: I am convinced that there is something wrong with that 1511 build but I don’t have the skills to figure it out. So I tried it there.Low and behold the MJ dongle was recognized at start and restart. Then I remembered my wife's computer had not been upgrade to 10 version 1511 yet. Window would not recognize the MJ mass storage device upon restart. I tried MJ on my HTPC running Windows 10 version 1511 but with an Asus mobo and an AMD processor. The next day I clean installed 10 with version 1511 again and back to MJ not being recognized at boot again. With 7 clean install and fully updated, MJ dongle worked each and every time I shutdown and restarted. I removed Windows 10 and downgraded back to Windows 7 using my OEM 7 dvd. I even remove everything under USB controller. Under device manager with “show hidden devices” enabled, I removed all grayed out devices under Universal Serial Bus Controller. I have formatted the MJ dongle and tried an older upgrade I saved. My wireless mouse and keyboard work along with the printer and my external hdd work as expected. It’s not in the disk manager, not in the device manager or the device and printer section. Since, Windows 10 did the update to version 1511 every time I shutdown or restart the computer the next boot up windows will not detect the usb MJ dongle as a mass storage device. With Windows, starting back with XP and through 7 and with 10, at least the original release, it has worked well for the most part. Windows 10 Home version 1511 build 10586.23 64 bit
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |